Designed for sampling. Acting as a sterile barrier the Sterisart® Septum allows for a safe, aseptic sample transfer out of a closed, sterile system. This enables you to take samples whenever needed or to transfer samples into a rapid detection system after only a few days of incubation. A secure and flexible method no one else can offer you. Because real heroes deserve only the best.
Just click on the icons of the products for more information.
Sterisart® Septum for aseptic sampling and injection – your sample remains safely protected from contamination, while the simple piercing mechanism minimizes your risk of puncture injuries.
Two different color-coded tube clamps for clear identification.
The gamma-sterilized and gas-impermeable primary packaging eliminates the need for rinsing and the cost of rinsing liquids.
The air filter, with a safety clearance of 1cm, effectively protects the filter from coming in contact with culture media – even if foaming or vibration occurs.
Just one primary gas-tight package for all components. Instead of being sealed in a separate, difficult-to-open package, the easy-to-handle yellow plugs for closing the canister are in extra pockets directly inside the primary packaging.
The extra large, grip-optimized pre-installed vent filter caps are directly attached to the vent filter. Connected by a band, the caps cannot fall off or touch any surfaces of the isolator ensuring they remain safe from contamination.
Sterisart® CA* units, with cellulose acetate membranes, delivered the fastest flow rates in customer tests. As pioneers of membrane filtration, we have successfully developed a specific membrane structure that is less hydrophilic than conventional cellulose acetate membranes.
*Currently not available with Sterisart® Septum technology
Clearly visible graduated volume marks.
Optimized canister design with anti-foaming inlet.
Needle designed with protective shield.
Product traceability thanks to article ID codes.
In a head-to-head comparison test at the highest speed, our Sterisart® Universal pump was far below international regulations of no more than 3,520 particles per m3 in ISO class 5 cleanrooms for sterility testing. In fact, its results were 60 times lower than competitor A.
Save time and money in new or revalidation of your products with our Sterisart® units – we'll take the workload off your hands:
Option a) We will perform validation of your products directly through Sartorius.
Option b) You can validate your products on your own, and we'll match your expenses by supplying you with the equivalent in free products. (Terms & Conditions)
Interested? We are happy to send you your free trial. You will hear from us shortly.
*these fields are required
Sartorius Stedim BioOutsource offers sterility tests by Direct Inoculation and by Membrane Filtration to GMP regulations and in compliance with the European Pharmacopoeia (EP), Japanese Pharmacopoeia (JP) and the United States Pharmacopoeia (USP) standards.
Our Sartorius service team with its close-knit global network will be with you all the way to support your needs for microbiology equipment: from installation and qualification to preventive maintenance, repairs, and more.